Load Securing

  • Extra Dump Trailer D-rings

    Features

    PJ solid dump trailers come equipped with weld-on 4 d-rings, one in each corner. If you would like extra d-rings added, we can add them in pairs. The extra d-rings will be placed at a the same height in the corners and spaced evenly.

    • Dump D-rings rated at 9,000 lbs
    • Option Code: D
Get a Quote

  • Pair of D-rings

    Features

    • Dump D-rings rated at 9,000 lbs
    • Option Code: D
Get a Quote

  • Dump Tarp Kit

    Features

    Most states require dump tarps by law to keep your cargo/aggregate in your trailer. We offer a pull bar mesh tarp kit that is installed in the front of the dump on our tarp mount brackets. These pull bar tarp kits can come installed from the factory or be bolted on a later date.

    Option Code: P

    • Dump D-rings rated at 9,000 lbs
    • Option Code: D
Get a Quote

  • Weld-on Strap Ratchets

    Features

    • Working load limit: 5,500 lbs/2500 kgs
    • Winch ratchets use 4" straps (not included)
    • Winch ratchets are weld to the outside frame (2" x 6" tube)
    • Dealer Option Code: (F)
    • This option is often combined with the Under Frame Tie Down Flat
    • We also offer Slide Track Ratchets
Get a Quote

  • Stake Pocket D-rings (Adjustable)

  • Stake Pocket D-rings

    Ever wish you could move your d-rings to different positions around your trailer depending what you were hauling? If so, our stake pocket d-rings make a great addition to any PJ Trailer with our 3 3/4" inside diameter stake pockets. You can simply slide the channel inside the stake pocket and insert the hitch pin.

    • Fits PJ 3 3/4" ID Stake Pockets
    • D-ring rated at 11,780 lbs
    • Can be moved in seconds with no tools
    • Black Powder Coat Finish
    • Includes hitch pin
    • Not for use on dump trailer stake pockets
    • Stake Pocket D-rings do not fit most C4 Carhauler or Utility Trailers (Use Utility D-ring instead)
    • PJ Part Number: 180080

  • Utilty Stake Pocket D-ring

    We have developed a utility trailer version of our extremely popular stake pocket d-rings. This version uses a lighter d-ring and has a notch cut to clear the wrap tongue on a PJ utility trailer and 4" Channel Carhauler.

    • Fits PJ utility trailers and 4" Channel Carhauler
    • Channel is notched to clear trailer tongue
    • D-ring rated at 2,000 lbs
    • Can be moved in seconds with no tools
    • Black Powder Coat Finish
    • Includes hitch pin
    • PJ Part Number: 180078
Get a Quote

  • Cargo Tie Down Loops

    Features

    Our utility trailers come with stake pockets standard but some users prefer to use tie-down loops that sit above the deck. These are great for strapping four wheelers, UTVs, motorcycles, mowers, and other cargo. The cargo tie-down loops are sold in pairs, with two pair (4 loops) being the most common.

    • Rated at 1000 lbs capacity
    • Loops angled at 45 degrees
    • Loops mounted on top of the outside frame
    • Standard on expanded metal and solid sides
    • Option code: -TD01 (2 loops), -TD02 (4 loops), -TD03 (6 loops), etc.
Get a Quote

  • Bolt on Chain Rack

    Features

    • Rack stores up to 5 chains
    • Bolts to c-channel behind risers and front gussets on PJ gooseneck trailers
    • Can be locked to help prevent theft
    • Can be mounted to driver or passenger side (two racks recommended for chains & boomers)
    • Fit FS, FD, LD, FY, LY, & SD models
Get a Quote

  • Under Frame Tie Down Flat

    Features

    • Tie down flat is used for strapping down cargo and equipment
    • Flat is mounted below the deck of the trailer, welded to each cross-member
    • Made from 2" x 3/8" steel flat
    • Gives you unlimited tie-down points the entire length of the deck
    • 2004 DOT law made it illegal to use rub rail for load securement
    • Flat runs from the front of the deck to the dovetail
    • Often ordered in combination with our 4" winch ratchets on a slide-track
    • Dealer Option Code: (9) flat on one side or (99) flat on both sides
    • Available on FS, LD, FD, FY, and LY Models
Get a Quote

  • Winch Ratchets with Slide Track

    Features

    • Slide track channel is welded to the outside frame (2" x 6" tube)
    • Gives you unlimited tie-down points the entire length of the deck
    • This option is often combined with the Under Frame Tie Down Flat
    • Working load limit: 5,500 lbs/2500 kgs
    • Sliding winch ratchets use 4" straps (not included)
    • Includes one fixed weld-on ratchet between the axles
    • Slide track does not extend to the dovetail
    • Dealer Option Code: (K) slide track on one side or (KK) slide track on both sides
    • Available on FS, LD, FD, FY, LY, F8 models
Get a Quote

  • Extra Dump Trailer D-rings

    Features

    PJ solid dump trailers come equipped with weld-on 4 d-rings, one in each corner. If you would like extra d-rings added, we can add them in pairs. The extra d-rings will be placed at a the same height in the corners and spaced evenly.

    • Dump D-rings rated at 9,000 lbs
    • Option Code: D
Get a Quote